Tripp Lite UPS Battery Replacement Across Canada

Tripp Lite UPS battery replacement across Canada: OEM-compatible RBC cartridges, BP-series cabinets and 12V SLA packs for SmartPro, SmartOnline, SmartRack 3-phase, AVR, OmniSmart, OmniVS and BC Pro. On-site swap or ship-to-you with quotes within 4 business hours.

Tripp Lite UPS battery replacement across Canada. We supply OEM-compatible RBC cartridges, BP-series cabinets and 12V SLA replacement packs for every Tripp Lite UPS family (SmartPro, SmartOnline, SmartRack three-phase, AVR Series, OmniSmart, OmniVS and BC Pro) and install them on-site or ship them to you. The Tripp Lite line (now part of Eaton following the 2021 acquisition) keeps the same battery references it shipped with for the legacy installed base; we stock the high-volume SKUs and quick-order the long-tail ones from our Canadian warehouse. Most on-site replacements are completed in a single visit with no downtime to your protected loads.

3 to 5 yrtypical battery service life
25 Crated battery ambient
24/7emergency line

What a battery test actually measures

BATTERY STRING, IMPEDANCE READINGSOne weak block pulls down the whole string, so every block is measured and trended.12 Vblock 1OK12 Vblock 2OK12 Vblock 3OK12 Vblock 4OK12 Vblock 5OK12 Vblock 6HIGH12 Vblock 7OK12 Vblock 8OKBlock 6 reads high: replace the set, not the single block.

Impedance is read on every block and trended against the baseline. One weak block limits the whole string, which is why sets are replaced together.

What we replace

We service the full Tripp Lite UPS battery replacement catalog Canadian businesses run:

  • SmartPro RBC cartridges: RBC1500, RBC93-2U, RBC94-2U, RBC51, RBC52, RBC53, RBC68 and BP24V36 / BP36V15 / BP48V60RT extended-runtime packs for SMART1500LCD, SMART1500LCDT, SMART2200LCD, SMART3000RM2U and the SMART750RMXL2U / SMART1500RMXL2U / SMART2200RMXL2U rack/tower convertible chassis.
  • SmartOnline rack-mount modules: RBC93-2U and RBC94-2U internal hot-swap cartridges for SU1500RTXLCD and SU3000RTXLCD; external BP48V60RT3U, BP72V60RT-3U, BP72V37-3U, BP240V10RT3U cabinets for SU5000RT3U, SU6000RT3U, SU8000RT3U, SU10000RT3U; BP240V100 and BP240V200 floor-standing cabinets for SU16KRT and SU20KRT.
  • SmartRack three-phase battery cabinets: VRLA strings of 32-40 sealed lead-acid cells (or, increasingly, lithium-ion cabinets) for SU40K, SU60K, SU80K and the SUTX cabinet ecosystem. Battery breaker, inter-cell jumper and torque-spec terminal work included.
  • AVR Series, OmniSmart and OmniVS internal SLA packs: RBC005 (12V 7Ah) for the 350-700 VA chassis, RBC020 (12V 9Ah) for the 900-1000 VA chassis, dual 12V 9Ah packs for 1200-1500 VA models. Bottom-bezel customer-installable swap with printed instructions.
  • BC Pro internal 12V SLA: model-specific packs for the BCPRO350-BCPRO1500 legacy installed base.

How Tripp Lite battery replacement works

  1. Identify your Tripp Lite UPS model and RBC reference: look at the back-panel label or front-panel LCD, or send us a photo. Our team matches the correct cartridge or cabinet from the model number alone. The most common confusion: Tripp Lite RBC numbers (RBC51 / RBC52 / RBC93-2U) are entirely different from APC RBC numbers despite the shared naming, we know the difference. There is also a Tripp Lite RBC cartridge cross-reference showing which models each cartridge fits.
  2. Choose ship-to-you or full on-site service: for desktop, tower and 2U rack-mount chassis where the battery is a user-accessible bezel swap, we ship the matched RBC or pack across Canada from our Canadian warehouse with a printed swap card. For SmartOnline 5+ kVA with external battery cabinets, three-phase SmartRack cabinet replacements, and any site that prefers zero-touch service, we dispatch qualified technicians.
  3. Old battery removal and recycling: every on-site swap includes proper disposal of the spent lead-acid or lithium-ion battery in compliance with Environment Canada hazardous waste regulations. Recycling certificate provided.
  4. Written service report: battery capacity test results, RBC serial numbers, disposal documentation. The kind of paperwork facility, audit and tender reviewers actually ask for.

How often should you replace your Tripp Lite UPS battery?

For sealed lead-acid Tripp Lite UPS batteries the recommended replacement interval is every 3-5 years, depending on ambient temperature, discharge cycle frequency and load profile. Rack-mount SmartOnline systems running in high-density datacenter racks often fall closer to the 3-4 year end of that range because of the thermal profile inside a dense cabinet. Three-phase SmartRack VRLA strings typically run 5-7 years; lithium-ion battery cabinets (where deployed) extend that to 8-10 years with much better cycle-life characteristics under frequent shallow discharge.

The clearest signal that replacement is overdue is the front-panel Replace Battery indicator on SmartPro, OmniSmart, OmniVS, AVR Series and BC Pro chassis; the LCD warning on SmartOnline; or a battery-disconnected alarm on three-phase SmartRack. Two earlier warning signs to watch for: a self-test that fails and a runtime drop versus the unit’s commissioning baseline.

On-site service across Canada

We dispatch qualified technicians to perform battery replacement at your facility: same day in Montreal, Quebec City, Toronto and Ottawa, and within 24 to 48 hours in Vancouver, Calgary, Edmonton and elsewhere. Metro service pages:

Outside these cities, we ship batteries with installation instructions to every Canadian province and territory, or coordinate on-site service through our technician network for sites that need zero-touch service.

Why choose us for Tripp Lite battery replacement

  • OEM-compatible cartridges: same cell chemistry (typically Yuasa, Panasonic or CSB for the SLA range), same spec, same connector pinout, same charge curve. No grey-market parts and no compromise on warranty.
  • Simpler than dealing with Eaton-channel parts directly: the high-volume Tripp Lite RBC SKUs (RBC51, RBC52, RBC53, RBC93-2U, RBC005, RBC020) are regular catalogue items rather than special-order.
  • Bundled with maintenance contracts: battery replacement folded into annual or semi-annual preventive maintenance with cost savings versus a standalone service call.
  • Audit-ready documentation: written reports with battery test data, RBC serial numbers, disposal certificates. Acceptable to the kind of internal audit, ISO compliance, government tender and HIPAA-equivalent (PHIPA / PIPEDA) review process Canadian sites actually face.
  • Honest replace-vs-repair guidance: when a legacy BC Pro or OmniVS reaches the point where the battery cost no longer justifies keeping the chassis, we say so and walk you through the Eaton 3S / 5S / 5SC / 9PX migration path instead of selling another battery.

Frequently asked questions

How do I know if I need an RBC51, RBC52 or RBC53?

Match it from the SmartPro model number on the back of the unit. The SMART1500LCD takes the RBC1500 cartridge (two 12V 9Ah batteries, 24V), but only on versions with a battery access door; earlier versions without a door do not take the RBC1500. The SMART1500LCDT takes two RBC51 cartridges, each a single 12V 9Ah battery. The SMART3000RM2U, SMART2200RMXL2U and SMART1500RMXL2U take the RBC94-2U (four 12V 9Ah batteries, 48V), while the SMART1500RMXL2Ua revision takes the RBC93-2U (three 12V 9Ah batteries, 36V). For the SMART2200LCD the part is RBC52, a single 6V 12Ah battery, so confirm how many your unit holds before ordering. The rack-mount versions sometimes carry a -2U or -2URM suffix on the cartridge to indicate the rack-mount form factor.

Are Tripp Lite RBC numbers the same as APC RBC numbers?

No, despite the shared “RBC” naming, Tripp Lite RBC and APC RBC reference different cartridges entirely. Tripp Lite RBC51 is not APC RBC51. Send us your full UPS model number and we match the correct part.

Do you ship Tripp Lite replacement batteries to all Canadian provinces?

Yes, we ship via Canada Post, UPS or Purolator to every province and territory. Every battery is tested in house before it ships from our Canadian warehouse.

Can you do Tripp Lite UPS battery replacement on-site in my city?

Same-day on-site service in Montreal, Quebec City, Toronto and Ottawa; 24 to 48 hours elsewhere in Canada. Scheduled work is booked around technician availability and travel.

Do you handle Tripp Lite battery disposal and recycling?

Yes. On-site swap service includes battery disposal in compliance with Environment Canada hazardous waste regulations. We provide a recycling certificate for facility, audit and tender records.

What about lithium-ion battery cabinets for three-phase SmartRack?

For sites moving from VRLA cabinets to lithium-ion on three-phase SmartRack, we configure the chassis battery management system (float voltage, end-of-discharge cutoff, temperature compensation, charge profile) for the new chemistry and handle the decommission of the old string under hazardous-waste protocol.

Get a Tripp Lite battery quote today: email [email protected] with your Tripp Lite UPS model number, or call 1 (438) 800-0382 for pricing within 4 business hours.

Check where your batteries stand